
The short answer
Most of GTA VI's delay is in the game itself, about 180 ms on Xbox Series X, and you can't change that. What you can control is your TV: game mode on, motion smoothing off. On many TVs that difference is large, so check it first.
How much delay GTA VI has
Digital Foundry measured about 180 ms end to end for camera movement on Xbox Series X: from pressing the stick to the picture moving. That includes a wireless controller and about 10 ms of display delay. It is similar to Red Dead Redemption 2 and GTA V, and it barely changed between 60 Hz, 120 Hz and 120 Hz with VRR (Digital Foundry, 18 Nov 2026).
No PS5 or PS5 Pro measurement had been published as of 19 November 2026. A claim that Rockstar cut one frame of delay compared with its earlier games appeared in search summaries, but we could not find the source, so treat it as unconfirmed.
GameSpot's reviewer noted that some players may question the responsiveness at 30 fps, though he did not find it a problem (GameSpot review, 18 Nov 2026); before release, commenters in a Push Square poll said 30 fps makes the controls feel less responsive (Push Square poll, 10 Nov 2026).
Where the delay comes from
| Part | Can you change it? |
|---|---|
| The game: input, simulation and rendering at 30 fps, where every frame takes 33 ms | No |
| The TV's picture processing | Yes: game mode |
| Motion smoothing on the TV | Yes: off, or Samsung's Game Motion Plus if you accept some delay |
| Streaming, if you play over Remote Play | Partly: a cable instead of Wi-Fi |
What you can cut
- Game mode on the TV. It switches off picture processing that holds frames back. How much it saves depends on the TV (rtings.com lists both figures in each TV review); for one TCL model, figures reported from RTINGS' tests were about 10 ms in game mode and about 108 ms outside it. Consoles can switch TVs to game mode themselves (ALLM): on PS5 under Settings, Screen and Video, Video Output, ALLM (PlayStation Support: PS5 resolution and video output). Make sure your TV actually switches.
- Motion smoothing off, unless you have decided the smoother picture is worth it. On most TVs it only runs outside game mode, so it brings the full processing delay back. The trade-off.
- Use the HDMI input marked for games on TVs that have one (often the 4K 120 Hz port), with the TV's game settings on for that input. On LG that is Game Optimizer (LG Support: Game Optimizer).
- Camera settings. They don't change the delay, but turning off Camera Shake and lowering the follow delay settings (guides list them under Settings, Camera) can make the camera feel more direct (Player.One, 18 Nov 2026).
What doesn't help
- 120 Hz output or VRR: no meaningful change in Digital Foundry's measurement (Digital Foundry, 18 Nov 2026). 120 Hz on Xbox does help smoothness, just not delay.
- Lowering the console's resolution: the game has no performance mode, so it still runs the same way.
- Frame generation, on a TV or a PC: it makes motion smoother and always adds delay, because a frame in between can only be drawn once the next real frame has arrived.
If you play over Remote Play
Streaming adds its own delay on top of the game's. Neither Sony nor Microsoft publishes a figure. One measurement, by GIGA with a PlayStation Portal and a different game, found about 70 to 80 ms for Remote Play on a good home network against 30 to 40 ms on a TV, and about 110 ms on a weaker connection (GIGA, 27 Oct 2026). Nobody had measured GTA VI over Remote Play as of 19 November 2026.
So use a network cable on the console and, if you can, on the PC. And if you add frame generation on the PC, you add its time too: on our test PC (RTX 4080, Xbox app) a frame spends about 25 ms in UpscaleGTA at 60 fps, measured on 18 November 2026 and not with GTA VI. Smoother, not faster.
Our honest advice
For driving, exploring and story missions, the delay above is something most people adjust to. If you play competitively against other people, play on the console and TV directly, in game mode, with nothing added.